SPECIFICATIONS: INTERNAL
The HUNTINGTON EM has a 120/277VAC input. The maintenance free, sealed nickel cadmium batteries provide a minimum 90 minutes of emergency duration. A two stage charger and transfer system is standard. Stage 1: a cyclic charge which brings the battery voltage to a higher pre-set level than its normal float voltage. Stage 2: charger will keep a constant charging current.
SPECIFICATIONS: EXTERNAL
The HUNTINGTON EM is constructed from .420” thick, heavy duty cast aluminum. Stainless steel, tamper resistant screws are standard and ensure the integrity of the battery unit. The HUNTINGTON EM comes standard in either black or white powder coat. The HUNTINGTON EM comes standard with an external LED status indicator and test switch. The lamp housing is constructed from a vandal resistant polycarbonate for maximum durability.
HOUSING
The heavy duty diecast housing is designed to withstand abuse in areas such as correctional facilities, schools, apartment complexes and public areas that may be subject to vandalism.
INSTALLATION
The HUNTINGTON EM is supplied with a universal mounting canopy for field installations. Suitable for indoor, outdoor, damp or wet location applications with IP66 protection. Tamper resistant, stainless steel hardware is standard equipment. The high abuse polycarbonate cover offers extreme protection and superior performance.
EMERGENCY HEADS
The HUNTINGTON EM is supplied with two [2] bottom mounted MR16 style lamps. The lamps are enclosed in a vandal-resistant polycarbonate shield. The high abuse clear polycarbonate lens provides protection to the lamps. Tamper resistant screws are standard. The emergency light enclosure comes standard with a vacuum metalized reflector for an aesthetic look.
SPECIFICATIONS: ELECTRICAL
BATTERY: The HUNTINGTON EM is designed with nickel-cadmium batteries providing a minimum emergency duration of 90 minutes. Recharge time of the battery is twenty four [24] hours. The maximum battery operating temperature is from 50°F up to 104°F (10°C to 40°C).
CIRCUIT: The HUNTINGTON EM utilizes a high-efficiency two stage charger providing a fully automatic constant charging current with low voltage disconnect protection. All components used in the circuitry are temperature compensated. The charger also has brownout and short circuit protection. Charger status is easily determined via a dual diagnostic LED display which indicates AC/ON and High Charge. An external push button test switch allows maintenance personnel to quickly determine the operational status of the unit and lamp load. The charger also has brownout and short circuit protection.
SPECIFICATIONS: MECHANICAL
The HUNTINGTON EM is constructed of extra heavy duty cast aluminum with a 1/8” thick polycarbonate protective shield. Stainless steel, tamper resistant screws are standard. Field adjustable chevrons are standard. The HUNTINGTON EM is standard in an attractive matte black or white finish. The polycarbonate face shield is recessed into the housing making the HUNTINGTON EM one of the most rigid, yet attractive high abuse signs on the market.
WARRANTY
The HUNTINGTON EM comes with a 3-year factory warranty. Lamps are not covered under the warranty. Deliberate damage, misuse, improper installation effectively cancel the warranty.
FME Lighting | 18585 Coastal Highway | Unit 10 PMB 104 | Rehoboth Beach Delaware, 19971
877-234-8460 | Fax: 302-209-6538 | info@fmelighting.com